China Supplier AS/NZS 4671standard SL52/SL62/SL72/SL82/SL92/SL102/SL81 Square Reinforcing Mesh for Construction Building

• After-sales Service: 24 Hours Online
• Material: Low-Carbon Iron Wire
• Hole Shape: Square
• Mesh Size: 200mm
• Surface Treatment: Non
• Weave Technique: Welded
• Model NO.: SL62/SL72/SL82/SL92
• Application: Construction Wire Mesh, Protecting Mesh
• Color: Steel
• Type: Welded Mesh
• Certification: ISO9001, CE ISO14001
• Condition: New
• Tensile Strength: >515MPa
• Yield Strength: >500MPa
• Agt: 1.03
• Standard: AS/NZS 4671
• Grade: 500L
• Transport Package: Bundle &Pallet
• Specification: 2.4m x6m
• Trademark: heyou
• Origin: China
• HS Code: 73142000
• Production Capacity: 120000tons

Product Description

Reinforcing Welded Wire Mesh is also called Construction reinforced concrete mesh, Concrete reinforcing mesh ,wire steel bar mesh, steel concrete mesh.  Reinforcing Welded Wire Mesh is longitudnal reinforcement and transverse reinforcement were arraanged in a certain interval and  at right angles to each other, all the intersections are welded together. 

Reinforcing mesh was made by deformed bar after drawn, which is accorded to Australian/New Zealand Standard AS-NZS 4671-2001. The material is 250N, 300E, 500L, 500N and 500E, the mesh spaces is 200mm, there is two sides overhang which is 100mm.


 
The Advantage of Construction Reinforcement Mesh by AS-NZS 4671-2001 standard:

1. Save 30% of steel bar dosages
2. Reduce 50%-70% work time,improve construction progress and shorten construction period.
3. Cut down 5%-10% construction cost
4. Used widely,it has a good market development prospects.

The specification of rectangular reinforcement steel mesh as below:

Mesh Type and reference number	Longitudinal bars		Cross-bars		Mass for 6 x2.4 m sheets		Cross-sectional area/m width
	No.x dia., mm	Pitch@mm	No.x dia., mm	Pitch@mm	Unit area kg/sqm	Sheet, kg	Long'l bars sqmm/m	Cross bars sqmm/m
Squre,with edge side-lapping bars
SL102	10x9.5+ 4x6.75	200 100	30x9.5	200	5.6	80	354	354
SL92	10X8.6+ 4X6.0	200 100	30x8.6	200	4.6	66	290	290
SL82	10x7.6+ 4x6.0	200 100	30x7.6	200	3.6	52	227	227
SL72	10x6.75+ 4x5.0	200 100	30x6.75	200	2.8	41	179	179
SL62	10x6.0+ 4x5.0	200 100	30x6.0	200	2.2	33	141	141
Squre,without edge side-lapping bars
SL81	25X7.6	100	60x7.6	100	7.1	105	454	454

 

Product Code	Std Unit	Longitudinal Wires	Cross Wires	Mass(kg)	Dimensions(m)
SL62UTE	Sheet	8×6@200	20×6@200	18	4×2
SL72UTE	Sheet	8×6.75@200	20×6.75@200	23	4×2
SL82UTE	Sheet	8×7.6@200	20×7.6@200	30	4×2

 

Rectangular Reinforcing Mesh 2.4m*6m=14.4sqm
Code	Cross wire		Longwire mm		Mass/sheetkg	Quantityin pack
	Pitch@mm	No. x dia., mm	Pitch@mm	No. x dia., mm
RL718	7.60 @ 200	30 x7.6	6.75 @ 100	25 x 7.6	68	20
RL818	7.60 @ 200	30 x7.6	7.60 @ 100	25 x7.6	79	20
RL918	7.60 @ 200	30 x7.6	8.55 @ 100	25 x 8.55	93	20
RL1018	7.60 @ 200	30 x7.6	9.50 @ 100	25 x9.5	109	15
RL1118	7.60 @ 200	30 x7.6	10.65 @ 100	25 x10.65	131	15
RL1218	7.60 @ 200	30 x7.6	11.90 @ 100	25 x11.9	157	10

  

Reinforcing Mesh
Code	wire diameter	aperture	edge open	width	length	weight per sheet(kgs)
F62	5mm	200*200mm	200mm	2.4m	6m	20.92
F72	6mm	200*200mm	200mm	2.4m	6m	30.12
F82	7mm	200*200mm	200mm	2.4m	6m	41
F92	8mm	200*200mm	200mm	2.4m	6m	53.55

concrete reinforcing mesh specification
Mesh Type and reference number	Longitudinal bars		Cross-bars		Mass for 6x2.4m sheets		Cross-sectional area/m width
	No. x dia., mm	Pitch,@mm	No. x dia., mm	Pitch,@mm	Unit area,kg/sqm	Sheet,kg	Long'l bars,sqmm/m	Cross bars,sqmm/m
Structural and skatch
SE92	13 X9.0	200	30 X9.0	200	5.0	75	318	318
SE82	13 X8.0	200	30 X8.0	200	3.9	59	251	251
SE72	13 X7.0	200	30 X7.0	200	3.0	45	192	192
SE62	13 X6.0	200	30 X6.0	200	2.2	33	141	141
Non-structural
SL51.5	17 X5.3	150	40 X5.3	150	2.2	32	147	147
SL41.5	17 X4.0	150	40 X4.0	150	1.3	19	84	84

 

REINFORCING MESH TO AS/NZS4671:2001 / TRENCH MESH
Code	STD UNIT	LONGITUDINAL WIRES	CROSS WIRES	MASS / KG
L8TM200	6 Metre	3 x 7.60 @ 100	4.00 @ 300	6.8
L8TM300	6 Metre	4 x 7.60 @ 100	4.00 @ 300	9.2
L8TM400	6 Metre	5 x 7.60 @ 100	4.00 @ 300	11.6
L8TM500	6 Metre	6 x 7.60 @ 100	4.00 @ 300	13.9
L8TM600	6 Metre	3 x 7.60 @ 100	4.00 @ 300	15.9
L8TM2400	6 Metre	25 x 7.60 @ 100	4.00 @ 300	72
L11TM200	6 Metre	3 x 10.70 @ 100	4.77 @ 300	13
L11TM300	6 Metre	4 x 10.70 @ 100	4.77 @ 300	17.7
L11TM400	6 Metre	5 x 10.70 @ 100	4.77 @ 300	22.3
L11TM500	6 Metre	6 x 10.70 @ 100	4.77 @ 300	26.8
L11TM600	6 Metre	7 x 10.70 @ 100	4.77 @ 300	34
L11TM2300	6 Metre	24 x 10.70 @ 100	4.77 @ 300	107.1
L12TM200	6 Metre	3 X 11.90 @ 100	4.77 @ 300	16.3
L12TM300	6 Metre	4 X 11.90 @ 100	4.77 @ 300	21.8
L12TM400	6 Metre	5 X 11.90 @ 100	4.77 @ 300	27.3
L12TM500	6 Metre	6 X 11.90 @ 100	4.77 @ 300	32.8
L12TM600	6 Metre	7 X 11.90 @ 100	4.77 @ 300	38.1

 

Model	Pitch/ certres	Wire dia. (mm)	Length (mm)	Width (mm)	Newt cover(sqm)	Heyou reinforcing item	Cross section sqmm/m	Mass per sqm kg/sqm	No.of Longitudinal wire	No. of Cross Wire	Overhangs of Longitudianal wire	Overhangs of Cross wire	Weight(kg)
668	150	4.0	4650	1970	7.525	668L	83.8	1.315	14	31	75/75	10/10	12.44
665	150	5.3	4650	1970	7.525	665L	147.1	2.309	14	31	75/75	10/10	21.85
663	150	6.3	4650	1970	7.525	663L	207.8	3.263	14	31	75/75	10/10	30.87
665	150	5.3	6150	2420	12.760	665E	147.1	2.309	17	41	75/75	10/10	35.29
663	150	6.3	6150	2420	12.760	663E	207.8	3.263	17	41	75/75	10/10	49.86
662	150	7.1	6150	2420	12.760	662E	263.9	4.144	17	41	75/75	10/10	63.33
661	150	7.5	6150	2420	12.76	661E	294.5	4.624	17	41	75/75	10/10	70.67
300 Centres of hard drawn mesh
668	300	5.6	4950	2220	10.08	84/10	82.1	1.289	4*5.6mm+4*4.0mm	19	25/25	10/10	15.85
665	300	7.5	4950	2220	10.08	147/10	147.3	2.312	6*7.5mm+4*5.3mm	19	25/25	10/10	28.36
665	200	6.1	5050	2020	8.312	SE62 RES	146.1	2.294	11	26	25/25	10/10	24.79
665	200	6.1	5850	2420	11.93	SE62	146.1	2.294	13	30	25/25	10/10	34.10
665	300	7.5	6050	2420	11.58	SE73	147.3	2.312	9	21	25/25	10/10	36.51
665	300	7.5	5000	2270	10.08	SE73DE	147.3	2.312	8*7.5mm+2*5.5mm	19	7.5mm:25/25 5.5mm:25/25	10/10	30.69
664	200	7.0	5650	2220	10.432	SE72	192.4	3.02	12	29	25/25	10/10	39.93
662	200	8.0	5650	2220	10.432	SE82	251.3	3.946	12	29	25/25	10/10	52.16
661	200	9.0	6100	2420	12.76	SE92	318.0	4.99	12	29	25/25	10/10	71.65

The panel size 2.4m*6m is very pouplar in Australian market,but considered the transportation in container by sea and saved cost,we advise the customers to change the panel size to be 2.2m x5.8m.
The skatch of rectangular reinforcement steel mesh for RL718/RL818/RL918/RL1018/RL1118/RL1218 as below:

The production process of reinforcement steel mesh

Firstly,Purchase wire rod from steel factory	Secondly,Test the raw material tensile strength
Thirdly,drawing wire diameter as per contract	Fourthly,Straight and Cutting wire as per contract
Fifthly,The reinforcement steel mesh welded by automatic and electric resistance machine	After finished producing,the reinforcement steel mesh has a good condition storage.
Clearly and visible notches	Firmly and strong solid joint
Messured wire diameter of reinforcement steel mesh	Messured mesh space of reinfocement steel mesh

Our products packing and shipment:
 

Steel pallet for reinforcing mesh size 2.4m *6m	Loading container for reinforcing mesh sheet:2.4m *6m

3.Each sheet of reinforcing mesh panel shall include number of bars,pitch,length,width, and overhang dimensions. And the bar arrangement of reinforcing mesh panel has single bars,twin bars or combination of single bars and twin bars.
 4.The technical data of reinforcing mesh panle is contained composition and characteristic mechanical porperties of reinforcing steels.

4.1.1
Table1
Composition of reinforcing steels

Type of analysis	Chemical composition,% max
	All grades			Carbon equivalent value(Ceq)for standard grades
	C	P	S	250N	500L	500N	300E	500E
Cast analysis	0.22	0.050	0.050	0.43	0.39	0.44	0.43	0.49
Products analysis	0.24	0.055	0.055	0.45	0.41	0.46	0.45	0.51

4.1.2
Table 2
Characteristic mechanical properties of reinforcing steels 

Property	250N (Note1)	500L (Note1)	500N	300E (Seismic)	500E (Seismic)	Type of specified value
Yield Stress(Mpa) RekL                       RekU	≥250 ---------	≥500 ≤750	≥500 ≤650	≥300 ≤380	≥500 ≤600	CvL:p=0.95 CvU:p=0.05
Ratio         Rm/Re	≥1.08 ---------	≥1.03 -----------	≥1.08 --------	≥1.15 ≤1.50	≥1.15 ≤1.40	CvL:p=0.90 CvU:p=0.10
Unitform Elogation Agt(%)	≥5.0	≥1.5	≥5.0	≥15.0	≥10.0	CvL:p=0.90

Notes:

1. Grade 250N is supplied as plain round reinforcing steel complying with AS 3679.1,exceptthe tolerance of the diameter and roundness dosen't apply it.
2. For 500L steel bars,only requriement for wire diameter is less than 5.0mm is R_ekL≥500

Secondly,the panel size tolerances meassure way as:

1. Panel Size dimensions≤6m in length,there is 40mm tolerances.
2. Panel size dimensions>6m in length,the tolerance is ±0.7%
3. Wire diameter and mesh size measure and weld shear resistance test conformance to AS NZS 4761-2001 and as per contract.
4. Weigh the each bundle weight to calculate each panel weight.